Connect with your social network account

[LLeeT]

A friend has a Juki LU562 that is fraying the top thread. The machine bobbin was re-timed and that seemed to work for single layer of vinyl.
When attempting to sew 1 layer of vinyl, 1 layer of 1/2" foam and piping, the thread is fraying again. The bobbin has been re-timed several times now with no improvement. My first thought was needle 180 out. Any ideas out there?
Thanks, Lee

[Rhonda]

changed the needle > tension set right ? is thread good no rot in it ?

[LLeeT]

Ended up being the wrong needle. Pilot error strikes again. He is a happy guy again.