Juki LU562 problem
Posted: Thu Apr 11, 2024 7:26 pm
A friend has a Juki LU562 that is fraying the top thread. The machine bobbin was re-timed and that seemed to work for single layer of vinyl.
When attempting to sew 1 layer of vinyl, 1 layer of 1/2" foam and piping, the thread is fraying again. The bobbin has been re-timed several times now with no improvement. My first thought was needle 180 out. Any ideas out there?
Thanks, Lee
When attempting to sew 1 layer of vinyl, 1 layer of 1/2" foam and piping, the thread is fraying again. The bobbin has been re-timed several times now with no improvement. My first thought was needle 180 out. Any ideas out there?
Thanks, Lee